EDC for CCW: Spyderco Manix 2

Image courtesy Jason for TTAK

Editor’s Note: We’re excited to welcome Jay to our crew of blade-minded wordsmiths here at The Truth About Knives. The only reason this isn’t appearing under Jay’s own byline is that I’ve been too busy shooting this weekend (it’s a shame, I know) to get his WordPress account set up.

The Spyderco Manix 2 has become a bit of a modern legend. Chances are you already own one, but if not, I’ll save you the time: GO BUY ONE NOW.

I’m an avid Amazon purchaser, to the dismay of my bank account. I also very heavily utilize wish lists, where I keep my knife pipe-dreams. And this is where the Manix 2 resided for at least 6 months, alongside the Paramilitary 2. Finally one day I said “enough is enough” and I attempted to purchase the Para. Attempted being the keyword, as the shortage of stock bit me in the hindquarters (note, 8 months later, my Para2 order was filled!). I decided on the spot, I better pickup the Manix sooner rather than later. The first time I took it into the yard for some lawn care, I understood the hype behind this folder. But really, should I have been surprised at this? Spyderco themselves sum the Manix 2 quite well:

A recipe for folding knife success: Start with hard-use rated lock. Add a blade made of exotic high carbon steel. Manufacture it in Golden, Colorado using precise tolerances then add a healthy dash of American innovation. These ingredients are the Manix2, a concoction of solo features when combined make one of the strongest knives from Spyderco to date.

Image courtesy Spyderco


This is the second iteration of the Manix, though the first in this smaller size. Designed by Eric Glesser, Sal’s son, the original Manix featured a back lock on top of a larger frame (see the current Manix 2 XL for a comparative size).

Introduced in 2004, the original Manix had only a tip down carry pocket clip option, on top of black G10. In 2005, a smaller version was released in the current size of the ‘standard’ Manix. Both of these original models used Crucible’s CPM S30v, a stainless powder metallurgy steel.

The generational leap to the Manix 2 occurred in 2009, and the new knife saw notable upgrades: a caged ball bearing lock, 4 way pocket clip, and the addition of some serious jimping. There was also a slight downgrade in the steel department, fromS30V to 154CM. (Don’t worry, the switch was temporary.) The big brother Manix 2 XL cut into the scene (har har) in 2011, featuring a full flat grind, and a 3.85″ premium CPM S30v blade.

With such a notable change to the Manix 2’s blade steel, rumors began circling about how this would effect its already killer price, and the answer came in the form of the 2012 Spyderco Product guide. On page 24 was a picture of the slightly updated Manix 2, with a blade stamped ‘CPM S30v.’ This was the extent of the announcement, and in mid 2012, after the 154cm stock ran out, s30v Manix’s made their way into the market without a price increase. The Manix 2 S30V was off to the races.

As with any massively successful Spyderco product, the line has seen multiple sprint runs, and even a lightweight fiber reinforced nylon version. This review, however, will focus on the standard, 3.375″ blade Manix 2.

Image courtesy Jason for TTAK

The Steel

Crucible’s CPM S30v is a hardened, powered metallurgy steel, whose chemistry produces the formation and even distribution of vanadium carbides. This is notable because vanadium carbines are harder and more effective at cutting than chromium carbides.

S30v was developed by Dick Barber of Crucible in collaboration with Chris Reeve. Feedback on this steel was also received from Sal Glesser, Ernest Emerson, Tony Marfione, Phil Wilson, William Harsey Jr., Tom Mayo, Jerry Hossom, and heat-treat legend Paul Bos.

With 14% chromium content, s30v has very good corrosion resistance. This, combined with it toughness and cutting ability, leads to an expensive raw material. CPM S30v strongly effects the price of the final knife: not only from the steel cost, but the wear on tooling and belts due to the vanadium carbides. Despite this, it is considered by many knife companies to be one of the best knife steels available on the market.

Image courtesy Jason for TTAK

The Blade

Even though summer is winding down, sometimes there is just nothing like a cold lemonade, or beer, on a hot day. And sometimes, that classic Spyderco leaf shape is just what the doctor ordered. The blade is 86mm (3.375”) of security blanket goodness. A fantastic size and shape combination, with some generous, grippy jimping on the thumb ramp. Additionally, there is a front choil, with the same type of jimping.

Choils can be intensely useful, but in certain circumstances they can reduce the cutting edge, as this blade demonstrates with a 2.875” edged length. (ED: this blade reminds me of the Native FRN.) The slight belly helps counteract this, however.

The S30v stock is 3mm (.125”), and the grind is classified as a sabre: a half hollow grind. The secondary bevel is about 1.26mm (0.05”) high according to my calipers, and the blade thickness behind the bevel is right about 1mm (0.039”). The finish is high polished, a bit too much for my own tastes, but should help improve the already great corrosion resistance. Overall, this is an extremely useable blade which should to prove to be extremely durable.

Image courtesy Jason for TTAK



TANK. Seriously. This knife could be used as an impact weapon against that old Nokia 5100 from 12 years ago. G10 and solid stainless liners makes for a seriously tactile tool. In an interview with designer Eric Glesser, he explained the reasoning behind solid liners: the lack of ‘pockets’ in the liners makes for easier cleaning in the field. Additionally, there are less places for dirt and grime to hide. The cost though? This knife weighs a hefty 5oz.

When I first handled it, I was surprised how heavy, but solid it felt. It’s not ‘heavy’ per se, but I’m used to the Para2 and my EDC is a techno. Make no mistake though, this knife is SOLID. In three places, the liners are ‘proud’ with generous jimping: in the front choil, along the top of the spine, and the bottom inside of the grip. This knife is absolutely stable in hand, and even more so with gloves on your hand.

The G10 is the premium American type Spyderco is known for: a perfect balance of grip. Over time, this will probably wear on your pockets a bit, but that’s a trade off for tactility. The lock is a caged ball lock: functioning much like Benchmade’s axis, but using a ball bearing instead of the axis bar. Additionally, it uses a more standard linear spring, rather than the omega springs in the Benchmade. This is a huge upgrade all by itself, with the omegas having a reputation for wearing out rather quickly. The Manix 2 is a serious knife, with some seriously impressive construction. The fit and finish is top notch, as we would expect from the Golden, Colorado facility.


This is such a comfortable knife to hold. In the standard grip, the generous front choil just hugs your index finger, and instill confidence. With such an abundance of gimping all over, this knife is incredibly stable. I barely feel the pocket clip in my palm, and the grip is ample enough even for my XXXL hand. Choking up for finer tasks is blissful, with your index finger falling right into the gimped front choil, and your middle finger taking the back choil. Really, kudos to Eric for nailing a fantastic, useable handle shape.

Image courtesy Jason for TTAK

In the pocket, this knife is pretty wide. My calipers indicate that it’s 1.75” from the widest ‘blade-to spine’ area. This may or may not suit you, but it is something to note. I’m a tall guy, with sturdy legs, so a knife like this is no issue at all for me. As you can see in the picture, the knife rides pretty low in the pocket. The clip is positioned about as high up as possible on the scales that Spyderco could manage.

The lock is a blessing and a curse. Early copies of the Manix 2 had a significantly softer lock spring. As users abused their knives on video for the amusement of YouTube viewers and noted lock failures, complaints rolled into Golden. It seems that hard spine whacks, and blade overstrikes caused the lock to fail. In response, Spyderco stiffened up the spring. This supposedly fixed the lock failures, but made the lock quite stiff to disengage.

When my knife was new, it was so stiff that I had to prop the bottom of the knife into my palm, and pull back on the cage with my my thumb and index finger. This actually caused me to catch the meat of my palm with the tip of the blade a few times. I was about ready to write the blade off, until it eventually broke in.

I still have to grip the handle quite tight, and use my thumb and index finger to pull back the ball, but its not quite the hand gymnastic undertaking it once was. It’s harder to disengage than an axis lock bar, but quite manageable. A user used to the Benchmade mechanism will find the transition awkward, but after a while, its not big deal. One handed, ‘wave’ closing is easily accomplished.

Favorite Feature: Strength

This knife instill confidence, and has become a staple in my yard/house work kit. Also worth noting: the price. This is a steal for the feature set of S30V, G10, and a smooth ball-bearing action.

Least-Favorite Feature: Break-In

It was a pain for a while, and almost turned me off the knife. But a little bit of work and dedication to the Manix will reward you with a lifetime companion.


Type: Locking Folding Knife
Blade style: Sabre ground leaf
Blade dimensions: 3.375″ by 1.375″ by 0.125″.
Steel: CPM S30v
Grip: Ergonomic G10
Overall length: 8”
Weight: 5 ounces
Price: $85 street price, $146.95 MSRP
Made in USA

Manufacturer’s Links: www.spyderco.com

RATINGS (out of five stars)

Styling: ****
This being an objective category, the satin blade dings it for me

Blade: *****
Extremely sharp with excellent edge retention, and handy for nearly any use. The forward choil reduces the cutting edge quite a bit, but the belly helps compensate.

Ergonomics: *****
The handle is one of the most comfortable I’ve ever felt.

Ruggedness/Durability *****
I have complete confidence I will pick up one of these knives in Fallout 3. Still sharp.

Overall Rating: *****
At a street price of $85, this knife is a ‘must purchase.’



  1. Nathan says:

    I Love my lightweight Manix 2. I don’t think they’re sprint runs anymore. I think they went full production with them

  2. Jay says:

    The lightweights are full production. I didn’t mean to imply they are sprints. Great knives!

  3. Mike Brandyberry says:

    well, i followed his advice.
    My new edc should be here by thursday!
    thanks jay!

    1. Jay says:

      Glad to hear it. I doubt you will be disappointed.

      1. Ed says:

        Just got mine a few days ago. I’m seriously in love with it. I’d bought a tenacious without having done much research to replace a smaller unit I don’t even know the name of that I carried for 15. The tenacious disappeared and I went looking for a new tool. Read your review and ordered immediately. I’m definitely not disappointed in any way shape or form. I love the Manix 2.

        I have relatively small hands, still feels great. Solid as hell.

  4. Chris Dumm says:

    Just what I needed to know about: another $100-ish knife I really want. My wife is so happy to see me read this…

  5. Mike says:

    Every listing I’ve found on Amazon was for the 154CM blade.

    1. Jay says:

      The 154CM ones aren’t made anymore, so they should all be S30v. FWIW, my copy was from Amazon.

  6. jimmyjames says:

    Tip up only is a deal breaker for me.

  7. jimmyjames says:

    Knife Center is $112 for the special steel.

  8. Jay says:

    That’s more than you should be paying. BladeHQ has it for ~$89 and that has s30v listed.

    As far as I know, TTAK has no BladeHQ affiliation, I’m just a happy customer.

    1. NavyRetGold says:

      But it will actually cost $95 with shipping unless you buy something else from BladeHQ to get over their $99 minimum for free shipping. Not a biggie, but worth noting.

  9. Mark Davis says:

    In my opinion, 5 oz is too heavy for a 3 inch folder. I’d lean towards the lightweight version recommended by Nathan and Jay – its only 3 oz.

  10. racer88 says:

    I’m carrying the lightweight translucent blue Manix 2 right now.

    The M2 is one of my favorite Spyderco models. It’s NOT a “gentleman’s folder.” I’ve got some of those, too. But, the M2 is a “man’s knife.” It’s robust. It’s rock-solid when locked open. And, it’s got a great grip.

    I have seven of them, including some exotics like the S90V / CF that I had to get from a dude all the way in Australia!


    1. Jay says:

      Beautiful. I love the Manix.

  11. Daniel says:

    Great review. Now I have another item for my knife lust list.

  12. NavyRetGold says:

    The Spyderco fanboys are out in full force today. I havn’t drank the kool-aid yet, but I can see some appeal in this knife. Non-skeletonized steel liners are good in my opinion. I’m not a Nuttnfancy fanatic about light weight EDC knives, I prefer strength and reliabilty at the expense of a little more weight. I never have warmed up to the standard Spyderco leaf blade design. That big Spyderco hole drilled in the exact position of the blade where it should be the strongest is another one of my concerns. A quick scan of Amazon, BladeHQ, and a few other sites turned up three different blade steels, multiple colors, and other variations, at a wide range of prices… all moderately high. The heavier weight version seems like a decent knife for the most part, better than the plastic Spyderco stuff, and miles ahead of the SOG and Gerber junk. Still not appealing enough for me to plunk down serious money based on sales lit alone. Unfortunately, no decent blade shop in my area that I could go actually look at one.

    1. Jay says:

      Some of the Spyderco knives, IMO need to be owned to understand their strengths. The plastic Delica, is a classic, and an absolutely fantastic knife for what it is. But I can understand your reservations. I’m in a similar vein with Zero Tolerance knives: none of them have struck my fancy.

      I just did a quick search, and didn’t see this other knife reviewed here yet, so I’ll probably add it to my plate: the Paramilitary 2. I think that is the quintessential Spydie, and it’s for good reason. If the Manix doesn’t strike your fancy, I’d suggest that as your first foray into the Spydie World.

  13. Cramer says:

    Of all the EDC knives i have my top 2 are the Benchmade Griptillian, and Spyderco Manix, to which it is an easy muscle memory transition,speed v’s wieght? The Manix is masculine,intimidating and a hefty tool giving the user the feeling of a solid implement in hand,no upgrades needed here.

  14. David Menges says:

    What are the three knives in the pictures?

    1. Slice says:

      My guess: Delica, Manix 2, original Manix. I have a Delica and it appears to be identical to the blue knife in the photographs.

  15. DJH says:

    Looks like a Delica, Manix2 and ParaMilitary2.

Write a Comment

Your email address will not be published. Required fields are marked *

EDC for CCW: Spyderco Manix 2

button to share on facebook
button to tweet
button to share via email