Gear Review: Tormek Sharpening System

[Editor’s note: H. Clay Aalders is a Tennessee fly-fishing guide with no use for a dull knife, and we’re glad to have him. Check out his professional profile here.]

We’ve all heard the adage, “a dull knife is a dangerous knife.” Having a sharp edge on any tool makes for a cleaner, more precise cut with less effort on the part of the wielder or machine. I am not a professional sharpener, but I consider myself fairly proficient at freehand sharpening – having grown up a Boy Scout, making a living as a professional fishing guide, and making sawdust as an amateur woodworker. I spent a lot of money on stones (still a sound investment), angle guides, lapping plates, blister-packaged do-dads from Smoky Mountain Knife works, etc. But I found that, despite my best efforts at sharpening my expensive hand-planes and chisels, they’d dull faster than I would like . . .

Thanks to a very generous gift from my sponsor (in the form of a Woodcraft Xmas gift card from my wife), I took the plunge and bought a Tormek 2000 (older precursor to the T-7).

The Tormek is a low-speed, self watering, grinding wheel system. Imported from Sweden, it comes in two basic models, the consumer-grade T-3 and the larger, commercial grade T-7. Don’t let the grading fool you, the T-3 is not a delicate unit. Rather, the T-7 is probably just overkill for for those not sharpening mower blades, axes, or farm implements on a regular basis (it is warranted for 7 years of industrial use).

The T-3 comes with an 8” wheel (T-7 10”) that rotates vertically through a trough of water. Because the stone rotates slowly and is continuously lubricated and cooled, the tool’s edge does not lose its temper.

The heart of the Tormek system lies in the guide rod. This serves as a foundation for several dozen different jigs, most of which are sold separately. The rod can be positioned for grinding against or away from the rotation of the stone, and adjusts up/down to set the angle. Grinding angle is measured by the included gauge that even calibrates for changes in the stone’s diameter with use. The tool is clamped in the appropriate jig, and then you turn on the machine. Depending on the jig and the action required (they make jigs for any manner of lathe-turning gouges and knives, many of which resemble artifacts from the Spanish Inquisition), you slide the jig back and forth across the rod, with the cutting edge moving across the surface of the stone. Depending on the level of sharpening required, the wheel (normally 220 grit) can be prepped to 1000 grit by holding an included stone against the wheel.

Once the blade has been ground at proper angle, the final step is honing. On the other side of the Tormek, opposite the the grinding wheel, is the stropping leather. You impregnate the wheel with a small amount of light-tool oil (like you’d use with pneumatic tools), and then apply a bead of (included) pumice paste honing compound. You have the choice of using the jig and guide rod again, or simply free-handing it.  Run the edge across the turning leather wheel  for a few seconds (away from the direction of rotation!) and you’ll have a scalpel-like edge. Here’s a short clip of a Tormek-sharpened knife Cutting Paper.

The biggest drawback of the Tormek system is the price. The base price of a T-3 unit is $379, and the T-7 is $639. The only included jig is the Right Angle one for chisels and handplane irons. [Ed: probably not too useful for making knives sharper.] There are two available knife jigs, the $38 standard model that’s suitable for most applications from a Swiss-Army knife all the way up to a medium-size chef’s knife. The Long Knife Jig ($54) helps stiffen longer blades such as those you would find on a filet knife, as well as providing more stability for larger knives.

The other drawback of the Tormek system is that while it excels at convex blades, you obviously can’t sharpen a serrated edge, and concave blades are difficult against a flat stone. Using the Tormek takes some practice; I would certainly recommend that you are comfortable sharpening more utility oriented blades before attacking one of your priceless collection pieces. For a typical convex edge, however, you can achieve results that are of professional quality – often better than a knife will come factory standard.

Included with the unit is a diamond dressing wheel. Used with the guide rod, this allows you to restore the grinding wheel to true and square.


The Tormek is not for everyone, and its price certainly makes it an ‘investment.’  However, even the lower-price Tormek T-3 is built to last, and with a wide range of jigs it will provide you with a lifetime of optimally sharpened tools.


  1. GA EMT says:

    Really unimpressed with the paper cutting link in this post. You need to get this guy to be a contributor to TTAK.
    Skip to 11:40 to see him cut paper.

    1. Cool video. Made me go try the “whittling” paper. I passed, but I am not yet a Jedi. Not nearly so smooth.

      As I said in the review, I am not a “master” by any stretch. Just a gearhead who spends the bulk of my working life in the backcountry of the Smoky Mountains. I depend on good gear to ensure my clients and I have a safe and enjoyable experience.

      I look forward to getting to know everyone here at TTAK. I am excited to be able to share my experiences, but especially to learn from those whose experience and expertise vastly exceed my own.

      Tying into Chris’s post welcoming William Woods, let’s all jump down the rabbit hole together and see where it leads. I am looking forward to the journey.


      1. A wise man once said, “No matter how good you are at something, there is some guy in Japan who is super-human at it”

    2. Espen Lund says:

      See my post at the bottom. 🙂

  2. 2hotel9 says:

    That is nice, a little more high tech than I generally go. Have to admit that for sharpening my chisels, ax and hatchet, plane blades and mower blades I use files, and for my circular saw blades(carbide tipped) I take them to a sharpener, who laughs and points out that most people throw them away and buy new ones. To which I answer”Yea. Whats yer point?”

  3. 2hotel9 says:

    Oh, and howdy, Clay! Welcome to the party.

    1. Thanks!

      I am with you on using files for mower blades, machetes, and axes (splitting axes and mauls – if I owned a really nice felling axe, I would use a stone)

      My second choice for planes and chisels is a little wheeled clamp-jig, that fixes the blade at the desired angle. You then roll the jig and blade over a stone, or sandpaper on a lapping plate (my preference).


      1. 2hotel9 says:

        Yea, some people are just appalled when they see me use a file on a wood chisel. I do a lot of remodeling work so they get beat, especially in older houses with oak, ash and hickory lumber. And don’t forget nails!

        My splitting ax is an old 4 pound fireax so I don’t keep it razor sharp, though it is good as a felling and limbing tool, too. Have people trying to buy it off all the time, its a wood splitting monster.

        1. I am looking into getting a Hultafors Trekking Axe. Extremely hard to find in the States. I think I have found someone in Canada that ships to the USA.

        2. 2hotel9 says:

          Bro, before you do that check in at You will be impressed with what you can find in Garry’s inventory.

  4. Espen Lund says:

    Hi. I have the Tormek T-7. I’ve only had it for a few weeks so I’m still learning but this is a video of me cutting newpaper with a SOG Force ofter sharpening it on the T-7.

    1. Nice. I admit that when I wrote this (it was my first piece for TTAK, long before I ever imagined that I would be Editor) I was not completely versed in the intricacies of knife testing. Testing stock is now newsprint, coloring books. and the occasional yellow pages. Much more appropriate for deminstrating an edge than the copy paper I used in this.

Write a Comment

Your email address will not be published. Required fields are marked *

Gear Review: Tormek Sharpening System

button to share on facebook
button to tweet
button to share via email